Font Size


PVD Coatings Portfolio

  • PDF

Physical Vapour Deposition (PVD) is a process to produce a metal vapour that can be deposited on electrically non-conductive and conductive materials as a thin highly adhered pure metal, ceramic or composite coating. Single or multi-layer coatings can be applied during the same process cycle. Additionally the metal vapour can be reacted with various gases (oxygen, nitrogen, acetylene…) to produce ceramic (Oxides, Nitrides, Carbides...) or composite films (Carbonitrides, Oxynitrides...).

The process is carried out in a vacuum chamber at high vacuum (2×10-2 Pa) using two types of PVD techniques: Cathodic arc evaporation and Magnetron sputtering.

The PVD is a process for both colouring and the improvement of wear resistance. It involves the deposition of often very hard, thin ceramic or composite coatings (hardness > 2000 HV).


Има 40 гости присутни


Центар за Плазма Технологии - Плазма


ул. Вељко Влаховиќ
18/мезанин, 1000 Скопје
Република Македонија

канцеларија: +389 (0)2 3229 620
производство: +389 (0)2 2656 731
факс: +389 (0)2 3229 620